Allen Chang

Chief Solutions Officer

You know that crudely drawn scribbles on scrap paper aren’t going to cut it this time. You’re set to impress with limited time and a tight budget. It is time to create a proper board game prototype.

If you've tried your hand at board game prototyping at home, you’ve likely looked up a few tutorials on YouTube, such as the one below:

EmbedVideo

But for those who prefer reading, here’s a summary of essential tips for board game prototype printing.

Important Tips for Board Game Prototyping

One of the biggest dead giveaways when it comes to telling apart a homemade prototype versus a professional-looking one is the presence of a white border. Unless you're a lucky owner of a printer that can print oversized paper prints (if so, can I live with you?) you probably own a printer that will leave a blank margin around your print.

The best way to hide your white border of shame is to cut them out. But wait, don't cut to the line! We, along with about 

The bleed isn't optional, it's vital

 stress that you need to add some bleed. Put simply, "bleed" is extending your artwork area to go past your cut line. After you've finished printing and cutting out your prototype, you can be sure your board game won't have any exposed white edges even if you don't have Terminator-level precision.

Let's say you want to make playing cards, but typical office A4 or US letter paper is thin, flimsy, and screams "You made this at home." The obvious choice is to go with thicker paper that makes your board game prototype printing feel more professional. 

In the world of paper, "thickness" is measured by weight, or GSM. If you think that’s a mobile phone service jargon, you're showing your age. GSM stands for Grams per Square Metre. Your run-of-the-mill playing card can vary between 250gsm to 330gsm, which at this weight scale, is referred to as a card stock.

While you may be thinking: "Music to the ears, let's go with the thickest card stock and print both sides," your printer is most likely unable to handle it, and the sound of paper jamming would be the closest you'd get to a musical performance. To get around the issue of the "paper too thick, printer fail" problem, consider printing on the thickest paper your printer can take and bond two printed papers back-to-back to get an "I can't believe it's not card stock" result.

While there are printers for the home that allow printing up to 200gsm, printing prototypes 150gsm will still yield a decent result. Two pieces of paper bonded with some adhesive can yield a sturdier feeling card than a cardstock does at similar combined weight levels.

As for the adhesive, spray-on contact adhesive (sometimes called contact cement) yields amazing results. For those who need a live demonstration on how to apply this, check out the YouTube video above. Unlike the typical application of this type of glue, you don't have to wait for the surface to dry before bonding the paper. It's okay to spray both sides and apply wet-ish. This can be helpful since you get an opportunity to reapply if it's misaligned before it’s fully cured.

Finally, for those looking to make game boards, boxes, and punch boards, get greyboards (sometimes referred to as art mounting boards) and use the same bonding method as mentioned above. Bonding your paper to greyboards can elevate the quality of your board game prototype printing even further.

To take your board game prototyping to the next level, consider investing in the following tools:

ImageGallery

After working on many, many, many prototypes in my lifetime, the best tip we can offer you is to maybe get someone else to make your board game prototypes. While you will get that sense of accomplishment from making it yourself, the reality is that board game prototyping is costly, laborious, and rather wasteful.

To elevate prototypes, you may consider using digital printing services to print artwork. However, in terms of costs in raw materials and printing fees excluding labour, it can often cost about the same, and sometimes even more than specialty board game print-on-demand services.

Practically speaking, a single copy of your first card game prototype will likely take a day to make. With a couple of prototypes under your belt and ready for more complex builds, a copy of a game with a folded game board, box and punch board will still easily take a day or two to make.

That’s just making a single copy. Now, imagine having the displeasure of making a dozen copies of a game prototype. From experience, you should expect to add blood, sweat, tears, and at least two different cradle positions to your recipe.

With the above knowledge weaponised, you should have no issues making professional-looking board game prototypes. However, the biggest kryptonite for any homemade prototype is maintaining consistency across multiple copies. For example, should you need to make 10 copies, you should prepare at least 13 copies before collating the best-looking ones and scrapping the rest (or using them as personal test copies). If you are ever tasked to make that many copies of a game, best prepare yourself, as it's going to be an extremely long grind.

If you have never tried board game prototyping yourself, I encourage you to give it a go at least a couple of times to get an appreciation for the work that goes into making board games. You'll learn a lot in the process and might even pick up on details you might not have known otherwise the next time you pick up and play your favourite board game.

Perhaps you've already tried your hand at making board game prototypes and know that the time and cost required aren't worth the effort. This is why we created Launch Lab, a 

Launch Lab, print-on-demand for board games

 that eliminates the hassle and pain of making your own. Give yourself the time for you to focus on the important stuff, like making the best game ever. 

Besides getting someone else to make your board game prototypes, Launch Lab has some additional benefits that set it apart from other print-on-demand services.

Every game made through Launch Lab is retail-ready. That means if you put a game made through Launch Lab next to a game you pick up at a retail store, you would be hard-pressed to spot the one made using Launch Lab. This is made possible because many of the tools and machines used to make a Launch Lab game are the same ones used to make mass-production retail games.

Components for your prototypes

 or a retail game, your game will be on par with the best-in-class games.

One of the biggest issues with board game prototyping is maintaining consistency between copies of your game. One of the biggest woes in production that must be whispered in hushed tones is "drift". Drift is the error introduced in printing and cutting. A few millimetres of drift will mean the difference from a beautifully even border to one with edges that seem to go past the abyss. Even some print-on-demand services have difficulty taming the drift issue, so you can imagine how hard it would be for homemade prototypes.

At Launch Lab, we are particularly proud that we take exceptional care in minimising drift and take the same care with print-on-demand games as we do with any of our 

Mass production services

Making a board game prototype at home can be deceptively expensive. If you factor in the costs of materials, printing, and labour, you might be pleasantly surprised that Launch Lab is quite comparable. If you're planning to send your prototype to publishers or playtesters, doing so directly from Launch Lab might save you even more. 

Lastly, when you're at a point where you are looking to scale up your production, say for convention demos or limited run prints, the 

Unit cost estimator

 with Launch Lab goes from "affordable prototypes" to "I can make a profit."

If you've read the entirety of the article and found it helpful, why not give 

 a go right now? Seriously, what are you waiting for?

Perhaps a publisher has expressed interest in your concept, and now you need to make a professional impression with limited time and budget.

How to Make a Board Game Prototype

Board game prototyping can be a long journey, but it doesn’t have to be difficult. Find out what you can do to make the prototyping process easier!

You’ve spent countless hours designing your game, and now it’s finally time to share it with others beyond your circle of friends and family.

Tips and Tricks for Board Game Prototyping

Sign up for free to explore a universe of possibility.

Home

Launch Lab

Dispatch

TCG Smith

Roles

Resources

About

Shop

Allen Chang

All articles by Allen Chang

Tips and Tricks for Board Game Prototyping

Join Launch Lab now for free